VPLS – Manual

Scenario
This shows a manual VPLS configuration, with LDP signalling whereby incoming vlan 500 is matched and then mapped to a pseudowire with id 555.

IOS Config

hostname R1
!
interface Loopback0
 ip address 1.1.1.1 255.255.255.255
!
interface GigabitEthernet0/0
 service instance 500 ethernet
  encapsulation dot1q 500
 !
!
l2vpn vfi context VFI_CUST_1
 ! The vpn id must match on both ends
 vpn id 555
 member 2.2.2.2 encapsulation mpls
!
! bridge domain numbers have local significance
bridge-domain 500
 member GigabitEthernet0/0 service-instance 500
 member vfi VFI_CUST_1
!

XR Config

hostname R1
!
interface Loopback0
 ipv4 address 1.1.1.1/32
!
interface GigabitEthernet0/0/0/0.500 l2transport
 encapsulation dot1q 500
!
l2vpn
 ! bridge group and domains names have local significance
 bridge group BRIDGE_GROUP_1
  bridge-domain BRIDGE_DOMAIN_1
   interface GigabitEthernet0/0/0/0.500
   !
   vfi VFI_CUST_1
   ! The pw-id must match on both ends
    neighbor 2.2.2.2 pw-id 555
   !
  !
 !
!

Back to top